Miscellaneous Templates
Still haven't found what you're looking for, Bono? Try here, or contact us if this still doesn't clear things up.
Booklet
TECHNICAL SPECIFICATIONS
DIMENSIONS
Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")
REQUIREMENTS
Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 12-Page Booklet.
MINIMUM LINES AND TYPE SIZE
Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.
TECHNICAL SPECIFICATIONS
DIMENSIONS
Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")
REQUIREMENTS
Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 24-Page Booklet.
MINIMUM LINES AND TYPE SIZE
Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.
TECHNICAL SPECIFICATIONS
DIMENSIONS
Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")
REQUIREMENTS
Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 32-Page Booklet.
MINIMUM LINES AND TYPE SIZE
Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.
TECHNICAL SPECIFICATIONS
DIMENSIONS
Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")
REQUIREMENTS
Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 36-Page Booklet.
MINIMUM LINES AND TYPE SIZE
Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.
Disc Imprint
TECHNICAL SPECIFICATIONS
DIMENSIONS
Outside Diameter = 117.45mm
Center Non-holographic Area = 89.824 mm
REQUIREMENTS
Outer edge must be a grayscale or bitmapped image on a separate layer than the inner circle artwork.
MINIMUM LINES AND TYPE SIZE
Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.
Wallets
TECHNICAL SPECIFICATIONS
DIMENSIONS
Total Width = 289mm (11.375")
Total Height = 250mm (9.8437")
Panel Width = 141mm (5.5625")
Panel Height = 125mm (4.9375")
REQUIREMENTS
Include a bleed of 3.175 mm (.125") on all four sides.
MINIMUM LINES AND TYPE SIZE
Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.
Digipaks
TECHNICAL SPECIFICATIONS
DIMENSIONS
Total Width = 17.675"
Total Height = 9.85"
Finished Width = 5.6"
Finished Height = 4.925"
Spine = .5"
REQUIREMENTS
Include a bleed of 3.7mm (.125") on all four sides.
MINIMUM LINES AND TYPE SIZE
Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.
Poster Fold
TECHNICAL SPECIFICATIONS
DIMENSIONS
Total Width = 9.438"
Total Height = 9.5
Cover and Inside Panel Widths = 4.75"
REQUIREMENTS
Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right bottom panel and the back cover is on the left bottom folder.
MINIMUM LINES AND TYPE SIZE
Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.
TECHNICAL SPECIFICATIONS
DIMENSIONS
Total Width = 9.5"
Total Height = 14.1457"
Cover and Inside Panel Widths = 4.75"
REQUIREMENTS
Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right bottom panel and the back cover is on the left bottom folder.
MINIMUM LINES AND TYPE SIZE
Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.
TECHNICAL SPECIFICATIONS
DIMENSIONS
Total Width = 9.5"
Total Height = 18.781"
Cover and Inside Panel Widths = 4.75x4.719"
REQUIREMENTS
Include a bleed of 3.7mm (.125") on all four sides.
MINIMUM LINES AND TYPE SIZE
Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.